Nilight 60-Inch Truck Bed Light Bar – LED Work Light for Loading, Unloading, and Garage Projects
Nilight 60-Inch Truck Bed Light Bar – LED Work Light for Loading, Unloading, and Garage Projects
Couldn't load pickup availability
Why you'll love it
- 108 LEDs are 35% brighter than standard chips, making the vehicle highly visible in dense traffic day or night
- No-drilling installation with 5X-strength adhesive saves body panels from permanent modifications
- IP67 sealed housing withstands rain, snow, dirt, and sand for worry-free all-weather use
- Plug-N-Play 4-pin flat connector plugs directly into existing trailer adapter with no rewiring
- Universal 12V fitment works across nearly every pickup, SUV, RV, van, and trailer on the road
- 30,000-hour lifespan and 2-year warranty reduce long-term replacement cost
Perfect for
- Enhance rear brake and turn signal visibility on pickup trucks in heavy traffic
- Illuminate the area behind a truck or trailer when reversing at night
- Light up a truck bed for loading/unloading in low-light conditions
- Add ambient lighting under an RV awning during camping trips
- Install decorative or step-bar lighting for a customized vehicle look
Product Information
INCREDIBLE BRIGHTNESS - The Redline LED Tailgate Bar has 108 LEDs that shine 35% brighter than normal chips and ensure your car can be seen even in thickest traffic, day or night. FLEXIBLE & DURABLE LED LIGHTS - IP67 sealed housing, well protects LED strips against rain drops, snow, dirt and sand, super durable and flexible with up to 30,000 hrs. lifespan NO-DRILLING REQUIRED - it comes with a tough-as-nails adhesive enhancer that increases hold strength over 5X. No need to drill, it will not fall off, included mounting hardware for more secure installation. MOUNTED ANYWHERE WITH 12V POWER SOURCE - 60" LED strips, rated 12V, ultra long for cargo/pickup/camper/garage/RV Awning lighting or household party decoration. Multiple Use - widely used in Truck Bed Light, RV Awning Light, Step Bar LED Lighting, Side Door Led Lamp, Pickup Bed Light Kit, etc. Ideal for DIY. And wide use for Jeep Pickup Truck RV SUV. With the working voltage of 12V DC, fits for Amber turning on most vehicles. Such as Dodge Ram 1500 2500, 3500, 4500, Ford F150, F250, Chevy, Silverado, GMC, Sierra, Toyota Tundra, and most cars, trucks, Pickup, SUVs, RV, Van, trailers, etc.
Specifications: brake light, Reverse/DRL light Color: Red / White Working Voltage: 12-16V DC Light Source: 108pcs lads LED Strip Length: 60" Waterproof: IP67 Materials: LED Chip Silicone Working Lifespan: over 30,000 hours Plug-N-Play 4-pin flat connector, plugs directly into you trailer adapter. Features & Specs Compatible with Vehicle Type Car, Golf Cart, Truck Voltage 12 Volts Light Source Type LED Form Factor Strip Auto Part Position Outside Connectivity Technology Bluetooth Fit Type Universal Fit Additional Features Waterproof Water Resistance Level Waterproof Includes Remote? No Measurements Item Dimensions 8 x 0.3 x 7 inches Item Weight 0.2 Pounds Number of Pieces 1 Light Source Length 60 Inches
Frequently Asked Questions
Will this light bar make loading and unloading my truck bed faster at night?
Yes. The bright white reverse LEDs light up the entire bed and the ground directly behind the truck, so you can see tools, straps, and cargo without holding a flashlight.
Is the white reverse light bright enough to use as a work light in a garage or driveway?
The 108-LED reverse function is strong enough to illuminate the immediate work area behind the truck, which is useful for hitching, loading, and quick driveway projects.
Does the plug-N-play install save me time compared to a hardwired LED setup?
It saves a lot of time. There is no wire stripping, no splicing, no relay wiring; you simply plug the 4-pin connector into your existing trailer adapter and mount the strip.
Will the 30,000-hour lifespan mean I can leave it on for years of daily driving without replacement?
Yes. At typical daily driving hours, 30,000 hours equates to many years of use, so it is a true install-and-forget productivity upgrade.
Does the 12-16V working voltage range match a work van or commercial truck electrical system?
Yes. 12-16V covers every standard automotive electrical system, including cars, trucks, work vans, and most commercial fleet vehicles.
I run a small delivery fleet; will this speed up night loading at the dock?
Yes. The bright white reverse function gives drivers a clear view behind the vehicle when backing into a dock or loading zone, reducing the time spent on each stop and lowering the risk of contact damage.
Is the strip reliable enough for a contractor who drives to job sites every day?
With its IP67 sealing, 30,000-hour lifespan, and 2-year warranty, the strip is built for daily work use, including dust, dirt, and repeated loading.
Will the adhesive hold on a truck bed that sees heavy tool and equipment loading?
The included 5X adhesive enhancer plus screw-on hardware is specifically chosen for high-vibration, high-load use, so the bar stays put even on a work truck that sees daily heavy loading.
Can I install this myself in a single afternoon?
Most DIYers finish the install in 30-60 minutes with basic hand tools: clean the surface, mount the strip with adhesive and screws, and plug in the 4-pin connector. No special wiring tools required.
How does this compare to a portable rechargeable LED work light for job sites?
A portable work light has to be carried, set up, aimed, and recharged, whereas this strip is always mounted, always ready, and turns on automatically with your reverse or turn signal, which is faster on a busy site.
How does this compare to a hardwired LED pod light mounted in the bumper?
Bumper pod lights usually require drilling, wiring a relay, and tapping into the reverse circuit, whereas this strip is a no-drill, plug-N-play alternative that covers a much wider area across the tailgate.
I am worried this is going to be a long, complicated install on a fleet vehicle; is it really quick?
On a fleet vehicle with a standard 4-pin trailer adapter, the install is consistently under an hour per truck, which is a much shorter downtime than a hardwired lighting upgrade.
Will the white reverse light interfere with my factory backup camera image at night?
The reverse light is designed to supplement, not replace, your factory camera, and it actually improves night visibility on the camera feed by lighting the area behind the vehicle.
Does the 60-inch length cover a full-size truck tailgate for a uniform look?
Yes. The 60-inch single-row strip is sized to span the full width of most full-size pickup tailgates, giving a clean, uniform light line.
Will the bar help me hitch a trailer faster at night in a dark driveway?
Yes. The bright white reverse LEDs light up the hitch area, the ball mount, and the trailer coupler, which makes aligning and connecting a trailer in the dark much faster and less frustrating.
How do I install the Nilight 60-inch tailgate light bar?
Clean the mounting surface with alcohol and let it dry, peel the backing from the adhesive enhancer, press the strip firmly along the top of the tailgate or under the bumper lip, secure both ends with the included mounting screws, and plug the 4-pin flat connector into your truck's trailer adapter. The whole process typically takes 30-60 minutes with basic hand tools.
What is included in the box, and do I need to buy anything else?
The box includes the 60-inch 108-LED light strip, the 4-pin flat plug wiring harness, adhesive enhancer, mounting screws, and an instruction sheet. You only need basic hand tools (a screwdriver and a clean rag); no extra wiring harness is required if your vehicle already has a 4-pin trailer adapter.
How do I clean and maintain the LED strip once it is mounted?
Wipe the strip with a damp cloth and mild soap during routine car washes, avoid harsh chemical solvents, and periodically check that the 4-pin connector is fully seated and free of debris. The IP67 silicone housing is sealed, so no internal maintenance is required.
Will this light bar fit my specific truck, SUV, or trailer?
It fits virtually any 12V vehicle with a standard 4-pin flat trailer connector, including Ford F-150 and F-250, Dodge Ram 1500/2500/3500, Chevy Silverado 1500/2500, GMC Sierra, Toyota Tundra and Tacoma, Jeep Wrangler and Gladiator, most SUVs, vans, and travel trailers. The 60-inch length spans the full width of standard full-size pickup tailgates.
Does it work on vehicles that do not have a factory trailer adapter?
Yes. You can add an aftermarket 4-pin trailer wiring adapter (sold at any auto parts store) and the light bar will plug into it with no rewiring. Once the adapter is installed, the plug-N-play connection is identical.
Is the strip safe to leave on in heavy rain, snow, or after a car wash?
Yes. The IP67 rating means the housing is fully dust-tight and protected against temporary water immersion, and the 4-pin trailer connector is a sealed automotive-grade design, so rain, snow, road spray, and car washes will not damage the strip or its connections.
What is the actual lifespan, and what does the 2-year warranty cover?
The LEDs are rated for 30,000+ hours of working life, which at typical driving use equates to many years of service. The 2-year warranty covers defects in materials and workmanship under normal use; keep your proof of purchase and contact Nilight support if you experience any failure.
What is the difference between a tailgate light bar and replacement tail light assemblies?
A tailgate light bar is a single 60-inch LED strip that mounts across the top of the tailgate to add a second layer of red running, brake, amber turn, and white reverse light without touching the factory housings. Replacement tail light assemblies are full OEM-style housings that swap in for the factory units, require more labor, and typically cost several times more, while this bar is a no-drill, plug-N-play add-on.
