DAYBETTER RGB LED Strip Lights – 32.8ft Mood Lighting for Behind TV, Cabinets, and Living Room Walls
DAYBETTER RGB LED Strip Lights – 32.8ft Mood Lighting for Behind TV, Cabinets, and Living Room Walls
Couldn't load pickup availability
Why you'll love it
- Three length options (16.4ft / 32.8ft / 66ft) fit any room size without cutting or splicing
- IP65 waterproof strip lets you use the same lights indoors and outdoors for parties and holidays
- Strong adhesive sticks to clean dry surfaces like TVs, cabinets, and car interiors without falling off
- 20 colors and 8 dynamic modes on a 44-key remote give big-customization feel at a budget price
- Low 12V DC operation is safer to handle than mains-powered accent lighting
- Linkable design lets you expand the run later without buying a whole new kit
Perfect for
- RGB backlight behind TV to reduce eye strain during long viewing sessions
- Ambient bedroom mood lighting for relaxation and gaming
- Christmas and holiday party decoration indoors or on a covered patio
- Under-cabinet or stairway accent lighting for safety and ambiance
- Custom themed lighting for birthdays, game nights, or movie marathons
The strip lights are IP65 waterproof Color changing with 20 colors. 8 light pattern: Quick/ Slow/ Auto/ Flash/ 3 color jumpy change/ 7 color jumpy change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease control. It is for indoor and outdoor lighting decoration, such as kitchen, under cabinet, dining room, bedroom,TV Backlighting, automobile, mirror, balcony, patio, automobile, etc.
No more accessories are required.
Easy to set up
These lights are very easy to install, make sure to test the lights before hang up
Widely use
Suit for living room, kitchen, cabinet, car, bedroom decoration
Safe to Use Outdoor
These led lights are IP65 waterproof, which means they can be protected against water jets (only the strips are waterproof, the power supply is non-waterproof)
Color: RGB
- Voltage: 12V
- Wide:10mm
- Waterproof: Yes, IP 65
- Input: 100-240V AC 50/60Hz
- Output: DC12V
- RGB control box
- 44 key IR remote control
- Control distance: 5M (must be poniting at the sensor without any obstacles)
- DC: 12V-24V
Product Information
IP65 waterproof: Covered with transparent silicone coating, this LED Strip Lights is dust-tight and rainproof but cannot be soaked in water for a long time, and the color is more crystal clear. (Only the LED strip is waterproof, the control box and power supply are non-waterproof) Strong adhesive:This led strip lights have a stronger adhesive tape, suitable any place as long as it is clean dry such as tv, cars, cabinets and walls 32.8ft (2 Rolls of 16.4ft)Color changing led lights strip can decorate living room, bedroom, kitchen, ceiling, back of TV, desk, stairs and so on Color changing: this led strip lights support 20 colors changing and 8 colors modes changing Widely use: this led strip lights suitable for living room, kitchen, cabinet, car, bedroom decoration
Features & Specs Indoor Outdoor Usage Indoor Additional Features Waterproof, Remote Controlled, Color Changing, Dimmable, Linkable, Adjustable Light Source Type LED Power Source Corded Electric Light Color Multicolor Controller Type Remote Control Voltage 12 Volts Wattage 60 watts Control Method Remote Water Resistance Level Waterproof Style Color Multicolor Theme Tv Occasion Christmas Product Style Modern Measurements Number of Light Sources 300 Number of Items 1
Frequently Asked Questions
Will the 20 colors actually look good against my bedroom wall paint, or do they wash out?
The SMD 5050 LEDs produce saturated RGB tones that read clearly on most matte and eggshell paint finishes. Light neutral walls will show the truest color, but the strip also holds up well against deeper paint colors when set to warmer reds, ambers, and magentas.
Does the strip look clean once installed, or will I see wires and adapters?
The LED strip itself is slim and sits flush against the surface thanks to the 3M-style backing. The 12V adapter and IR controller are the only visible components, and most customers tuck them behind a TV, dresser, or curtain for a near-invisible look.
Can I match the lighting to my existing decor style, like Scandinavian or boho?
Yes. The 20 static colors include soft warm whites, gentle ambers, and dusty pinks that complement neutral and earthy palettes, while the bolder blues and purples suit more eclectic or modern interiors.
Will the strip leave a sticky residue on my walls or TV when I remove it?
On clean, painted drywall the adhesive can occasionally lift paint if pulled aggressively. On glass, metal, plastic, and the back of TVs the strip usually comes off cleanly. Many renters test a small corner first or use removable mounting clips.
Does the 66ft option look too overwhelming in a small living room?
The 66ft strip is linkable and cuttable, so you only need to use the length your room requires. Excess can be coiled behind furniture or unused sections can be cut at the marked lines to fit a smaller space without overpowering it.
Is this a good way to upgrade my bedroom without repainting or buying new furniture?
Absolutely. A 16.4ft or 32.8ft run along the headboard, ceiling edge, or behind a dresser is one of the most affordable ways to refresh a bedroom, and the remote lets you change the mood by time of day.
Can I use it as the main light source in my living room?
It is designed as accent and mood lighting rather than primary room lighting. For a living room, most customers pair it with a ceiling fixture or floor lamp and use the strip for ambient glow and bias lighting.
How do I get the cozy, designer look I see on Pinterest?
Install the strip along the back edge of a TV, under floating shelves, behind the headboard, or along ceiling coving. Stick to a single warm white or amber tone for a calm, layered look, or use a slow fade mode for a softer effect.
Will it make my room look like a teenager's bedroom?
Not unless you want it to. The static color modes let you choose refined tones like warm white, soft pink, or deep blue, and the brightness is fully dimmable so the effect can be as subtle or bold as you prefer.
Does the strip suit both modern and traditional decor?
Yes. Because the LEDs are hidden and only the glow is visible, the strip works with almost any interior style. A modern room might use it as a backlight on a media wall, while a traditional room can use warm white under cabinetry or along a stairway.
How does this compare to LED neon rope lights for home decor?
Neon rope lights give a continuous glow but are bulkier, harder to mount, and usually only one color per strip. This RGB strip offers 20 colors and 8 modes in a slim, adhesive-backed form factor, giving more design flexibility at a lower price point.
What is better for a living room, this strip or a smart bulb setup?
Smart bulbs are great for overhead lighting and app control, but they cannot create the wall-washing and bias-light effects that an LED strip produces. Many customers actually use both together for layered room lighting.
Can this replace a built-in accent light for a media wall?
It is a popular budget alternative to a custom media wall installation. While it does not offer the same hardwired look, the diffused glow behind a TV or media console achieves a very similar visual effect.
Will the strip damage my TV screen or back panel over time?
No. The 12V DC power supply runs cool and the silicone-coated strip produces very little heat. It is safe to leave on the back of TVs, monitors, and other electronics for extended periods.
I rent, so I can't make permanent changes. Is this renter-friendly?
Yes. The adhesive is strong but usually removable from hard, non-porous surfaces, and the strip leaves no holes. Just confirm with your landlord if you plan to apply it to painted walls, as removal can occasionally affect fresh paint.
Will the adhesive hold on a textured or uneven wall?
Textured walls reduce contact area and can cause the strip to peel over time. For best results, mount it on smooth, clean, dry surfaces like the back of a TV, cabinet edges, baseboards, or trim.
How do I install the LED strip lights?
Clean the surface with alcohol or a non-residue cleaner, let it dry fully, peel the backing off the 3M-style adhesive, and press the strip firmly into place along your chosen edge. Then connect the strip to the IR controller, plug the 12V adapter into a wall outlet, and use the remote to turn it on. Most installations take less than 10 minutes.
Can I cut the strip to a custom length?
Yes. The strip has clearly marked scissor cut points, usually every 3 LEDs. Cut only on these marked lines, and make sure the power is unplugged before cutting. Unused sections can be saved for future projects or discarded.
How do I link two strips together?
Most DAYBETTER strips include a linkable connector on the end. Simply align the copper pads, slide the connector on, and make sure the arrows on the strip match the polarity of the connector. The total run should not exceed the wattage limit of your power supply.
Does it work with Alexa, Google Home, or Apple HomeKit?
The standard kit uses an IR remote and is not natively compatible with voice assistants. To add smart control, plug the 12V adapter into a smart plug or smart outlet that works with your preferred ecosystem, and you can use voice commands to turn the strip on or off.
Will it work behind any TV size?
Yes, but choose the strip length based on the back panel of your TV. A 16.4ft strip is usually enough for TVs up to 55 inches, while 32.8ft and 66ft work well for larger TVs or for running along a media wall.
What is included in the box?
The kit typically includes the LED strip in your chosen length, a 12V DC power adapter, an IR controller box, a 44-key remote (batteries may or may not be included depending on the seller), and a small user manual. Mounting clips are sometimes included, otherwise they are a recommended add-on for outdoor or long runs.
Is it safe to leave on overnight or while I am away?
Yes. The 12V DC power supply runs cool and the LEDs themselves produce very little heat. There is no open flame, no hot bulb, and no risk of overheating under normal use. As with any electrical device, do not cover the adapter or controller, and unplug during severe storms if used outdoors.
Does it get hot enough to damage walls, paint, or furniture?
No. The strip runs at a low temperature under normal use, well below the level that would affect paint, drywall, wood, or plastic. It is safe to leave on surfaces like the back of a TV, under cabinets, and along baseboards.
What is the difference between LED strip lights and rope lights?
LED strip lights are flat, flexible circuit boards with surface-mount LEDs, allowing them to sit flush against surfaces and produce a wall-washing glow. Rope lights are round, tube-encased LEDs that look more like a string light. Strips are usually brighter, more color-accurate, and easier to mount, while rope lights are bulkier but more visible as a decorative element.
