Command Outdoor Light Clips – Clear Patio String Light Hangers for Vinyl Siding and Pergolas, Weather Resistant
Command Outdoor Light Clips – Clear Patio String Light Hangers for Vinyl Siding and Pergolas, Weather Resistant
Couldn't load pickup availability
Why you'll love it
- No holes, marks, or sticky residue left on siding, soffits, or interior walls
- Holds strong through rain, snow, sleet, and heat so decorations stay up all season
- Reusable clips with inexpensive replacement strips extend product life and value
- Clear plastic blends into trim and walls instead of standing out as a visible hook
- Tool-free installation means no ladder drilling, electrical work, or professional help
- Safe for rental properties where landlords prohibit permanent modifications
Perfect for
- Hanging outdoor string lights along eaves for Christmas or year-round ambiance
- Mounting patio bistro or café lights on fences, railings, or pergolas without drilling
- Organizing and routing outdoor extension cords and cable runs along siding
- Adding LED or rope lights to a dorm room or apartment balcony in a renter-friendly way
- Temporary event lighting for weddings, parties, or backyard gatherings
Heavyweight Products
Visit the Store
General Purpose Hooks
Visit the Store
Picture Hangers
Visit the Store
Clear Hooks
Visit the Store
Bath Organizers
Visit the Store
Decorative Hooks
Visit the Store
Cord Management / Kits
Visit the Store
Command Outdoor Products
Water- and UV-resistant, Command Outdoor adhesive holds strongly year-round in rain, snow, and hot weather. Easy-on, easy-off so you can redecorate damage-free for every season.
Product Information
ONE LIGHT CLIP FOR EVERY TWO FEET OF LIGHTS: One package of the Command Clear Outdoor Light Clips includes 20 clear hooks and 24 small water-resistant Command Strips; use one light clip for every two feet of lights
DAMAGE FREE HANGING: Water- and UV-resistant, these outdoor clips hold strongly through rain, snow, sleet and heat to let you hang outdoor lights on a variety of smooth indoor or outdoor surfaces without tools
WORKS ON A VARIETY OF SMOOTH OUTDOOR SURFACES: Outdoor string lights bond to doors, flat vinyl siding, soffits, finished fences, tile, painted cinder block and windows
SURFACE PREP: Clean with a dry cloth to remove dirt and debris to allow the outdoor tool free wall hangers to bond to the surface; 3M Outdoor Light Clips hold strongly in outdoor temperatures between 15 degrees Fahrenheit and 125 degrees Fahrenheit
USAGE TIPS: Not recommended for use on rough surfaces, such as brick, cement board or rough-sawn wood; wait 1 hour after wall clip installation before hanging lights; do not use the wall clips for hanging valuable or irreplaceable items
EASY CLEAN REMOVAL: Lightly hold the top of the adhesive strip and slowly pull straight down towards the ground to remove the Command Outdoor Light Clips from your surfaces and prevent surface damage; reuse your hook with small replacement strips
Command Clear Outdoor Light Clips brighten up the interiors and exteriors of your living or working spaces without damaging surfaces. These clear clips blend into walls so you can showcase your decor. They also are water- and UV-resistant to hold strong through rain, snow, sleet and heat. A great home improvement item, these wall clips stick on a variety of smooth surfaces without leaving holes, marks or residue. Use these outdoor wall clips for hanging outdoor Christmas decorations, holiday lights, LED lights, rope lights, string lights, cables and cords. Mount these light hooks on doors, flat vinyl siding, soffits, finished fences, tile, painted cinder block and windows and enjoy the damage free hanging of your favorite lights. Use these light hooks inside or outside your home, office, apartment or dorm room to elevate the appearance of your space without tools. Directions are included that show how to use the wall clips. A clever decorating solution that doesn’t damage surfaces, these light clips will help you fearlessly change your space. One package contains 20 clear outdoor light clips and 24 small Command Strips. Use one light clip for every two feet of lights. Decorate, organize and celebrate damage free with Command.Part Number: AW017-20NA
Item Weight: 2.4 ounces
Product Dimensions: 1.25 x 0.82 x 0.5 inches
Size: 20 Clips
Color: Transparent
Style: 20 Clips
Material: Plastic
Pattern: Clips
Shape: Rectangular
Item Package Quantity: 1
Type of Bulb: String Light
Mounting Type: Wall Mount
Special Features: water resistant
Included Components: 20 Clips, 24 Strips
Batteries Included?: No
Batteries Required?: No
Date First Available: October 30, 2017
Frequently Asked Questions
Will these clips really hold up through rain, snow, and summer heat on an open-air patio?
Yes. The included water- and UV-resistant Command Strips are rated for outdoor temperatures from 15°F to 125°F, so the clips stay bonded through rain, snow, sleet, and heat waves. Most customers leave their string lights up year-round without reapplying.
Can I take these clips on a camping trip and reuse them at home afterward?
Absolutely. Each clip detaches with the stretch-release method by pulling straight down, and the same strip can be reapplied with a fresh small Command Strip refill. They travel well in a bag and work on camper awnings, tent frames, and picnic shelters.
How do these perform in coastal or very humid outdoor dining areas?
The adhesive is water-resistant and the clear plastic clip will not corrode or yellow from salt air. For best results in very humid climates, make sure the siding or surface is fully clean and dry before pressing the strip into place.
Is this strong enough for a long run of patio bistro lights across a large backyard?
Plan on roughly one clip every two feet of light string. A 30-foot run would need about 15 clips, and this 20-pack covers most standard patios. For longer runs, multiple packs keep the line taut and looking clean.
Will the strips leave a sticky mess on my vinyl siding when the season ends?
No. The stretch-release removal pulls cleanly down without leaving residue, holes, or marks on properly prepared vinyl siding. That is one of the main reasons renters and homeowners prefer this over screws or nails.
I'm a renter with a small balcony - will these work for a cozy outdoor setup?
Yes, balconies are one of the most popular use cases. The clips bond to vinyl siding, painted metal railings, and glass, and they remove cleanly at the end of your lease so you never lose a security deposit.
Can I use these for a backyard wedding or one-night event lighting setup?
They are ideal for temporary event lighting. Install them the morning of the event and remove them the next day with the stretch-release method. Buy a pack of small Command Strip refills if you plan to reuse the clips at future events.
What surfaces on a covered patio are safe to mount these on?
The clips work on smooth, sealed surfaces including vinyl siding, painted wood, finished fences, tile, painted cinder block, and glass windows. Avoid rough stucco, raw wood, and porous brick where the adhesive cannot get full contact.
How is this different from just using a staple gun on my fence?
Staples puncture the fence, can fray light wire insulation, and often leave rust streaks over time. These clips grip the wire without piercing it, and the adhesive removes cleanly so your fence stays in like-new condition.
Is this better than a permanent screw-in cup hook for outdoor string lights?
For most homeowners, yes. Screw-in hooks require a drill, leave permanent holes, and cannot be repositioned. The Command system installs in seconds, holds just as well in normal weather, and lets you change your layout each season.
What if a clip falls off mid-party - will my lights come crashing down?
A single clip will not cause a long string to fall if the surrounding clips are properly adhered. As a safety best practice, install one clip every two feet so the load is distributed. Replacement strips are inexpensive and take seconds to swap in.
How do I install Command Outdoor Light Clips step by step?
Clean the surface with rubbing alcohol and let it dry. Separate a small Command Strip, press it onto the back of the clip, remove the liner, and press the clip firmly to the wall for 10 seconds. Wait one hour for the adhesive to set, then thread your light string into the clip. To remove later, pull the strip straight down.
Can I reuse the same clip after I remove it?
Yes, that is the main value proposition. The plastic clip itself is reusable indefinitely - you only need a fresh small Command Strip refill (sold separately in multi-packs) to remount it. The product is designed for seasonal use, not single-use.
How many feet of light string will one pack cover?
Plan on one clip every two feet of light string. The 20-clip pack supports roughly 40 feet of clean, even light line. For longer runs or a denser pattern, buy multiple packs to maintain the recommended spacing.
Are these clips compatible with all string light wire gauges?
They work with most standard outdoor and indoor string lights up to a medium wire gauge, including common patio bistro lights, fairy lights, and LED rope lights. Very thick commercial cable may need a larger clip variant.
Do they work on vinyl siding, brick, stucco, and wood?
They bond to smooth, sealed surfaces including vinyl siding, soffits, finished wood, painted cinder block, tile, metal, and glass. They do not bond reliably to rough stucco, raw wood, brick, or peeling paint. Test a small area if you are unsure.
What is included in the box and what do I need to buy separately?
The box includes 20 clear plastic light clips and 24 small water-resistant Command Strips. You provide your own string lights, rubbing alcohol for surface prep, and replacement small Command Strips if you want to remount after removal. The included 24 strips give you 4 extras beyond the 20 clips.
Are Command Strips safe on freshly painted walls?
Wait at least 7 days after painting before applying any Command Strip so the paint can fully cure. Applying sooner risks pulling fresh paint off when the strip is removed. Once cured, removal is clean and damage free.
What temperature range can these clips handle outdoors?
The included water-resistant strips are rated for outdoor temperatures from 15°F to 125°F. That covers virtually every climate in the continental US, including snowy winters and hot summer patios in direct sun.
What is the difference between Command Light Clips and Command Hooks?
Command Hooks have a curved hook for hanging objects like keys or wreaths, while Command Light Clips have a low-profile channel that grips a wire flat against the wall. For string lights, the clip is the right tool - the wire stays flush and the look is much cleaner.
