Aukora Motion Sensor Light Bulbs – Weather Friendly Dusk to Dawn Outdoor Lighting for Patio, Driveway and Garage Entry
Aukora Motion Sensor Light Bulbs – Weather Friendly Dusk to Dawn Outdoor Lighting for Patio, Driveway and Garage Entry
Couldn't load pickup availability
Why you'll love it
- No electrician or rewiring needed — screws into any standard E26 socket for instant smart-style lighting
- Dual-sensor design (PIR motion + dusk-to-dawn) prevents daytime activation, saving energy
- Hands-free auto shutoff after 45-60 seconds eliminates fumbling for switches in the dark
- Cuts electricity costs by lighting only when movement is detected in dark conditions
- Affordable 2-pack delivers whole-home hallway and entry coverage for under the cost of one smart bulb kit
- Cool white 6500K option provides bright, daylight-like visibility for security, while warm white suits cozy indoor spaces
- Stays on longer when a person remains in the area even without much movement, avoiding premature shutoff
- Subtle lighting under beds that does not wake siblings
- Acts as a deterrent for cats entering the room
- Daylight sensor prevents activation in bright conditions
- Simpler and cheaper than installing a separate motion sensor switch in older buildings
- Compatible with fixtures where the tip protrudes below the bottom, unlike competing bulbs
Perfect for
- Auto-illuminating front porch and entryways at night to deter intruders and welcome residents
- Lighting dark hallways, closets, and stairways to prevent trips and falls at night
- Adding motion-activated security to garages, basements, and storage areas without rewiring
- Hands-free lighting in bathrooms and kids' rooms for middle-of-the-night navigation
- Replacing standard bulbs in outdoor fixtures with a dusk-to-dawn security upgrade
- Nighttime bathroom trips for children to navigate around toys and hazards without waking siblings
- Mud room lighting where the light switch is located inside the house
- Closets with unreliable old pull-chain fixtures
- Basement areas that receive ambient daylight
- Under-bed lighting to illuminate floor area at night
- Fireplace use where occupants are mostly stationary (moving only hands and head)
Aukora Lights
Create surprises and brighten up your life.
-
Aukora brand management philosophy:
Aukora brand products mainly for festive decorative lights, solar lights and lighting bulbs. In the Christmas, Thanksgiving and other holiday basic craft, combined with our latest trend collocation, can more highlight the unique style. Using the current mature solar technology, energy saving, safety. Motion sensor light bulbs and dusk to dawn light bulbs let you free your hands and switch.
-
solar table light / room decor
-
solar garden lights
Product Information
Specs: Input Voltage: AC120V; Output Power: 12W(100-Watt Equivalent); Lamp Style:E26; Daylight (Color temperature: 6000-6500K); Luminous: 1000lm; Working Temperature: indoor use and outdoor use if outside temperature is between 14°F(-10°C) and 95°F (35°C) PIR Motion Sensor Included: High quality PIR infrared sensor is installed at the tip of bulb, so the motion sensor bulb will light up automatically while it detects motion within 8-10 FT in the dark, and automatically off after the motion ceased or disappeared about 45-60 secs. NOTE: Make sure the sensor is pointing down within proper distance and angle. To increase the bulb's sensitivity, you can adjust the Angle and Height of the bulb installation, make the sensor toward the direction people Built-in Dusk to Dawn Sensor: This motion sensing light bulb will automatically switches ON at dusk when the movement sensor is activated and OFF at dawn.(Turn on below about 15Lux and off about above 40Lux) NOTE: Will not turn on in the daytime even when they detect motion. And if you use it for the first time during the day, it will turn on for 30 seconds and off when you turn on light switch Energy Saving and Usage Occasion: These movement sensor light only light up in the detective range at night or in dark environment, energy-saving, environment protecting and long life, can be use in stairs, hallway, bathroom, front door, storage room, garage, closet, balcony, gate and so on. The higher you hang the bulb, the larger detection range it achieves as the highest could be 10 feet vertically Package Includes ＆Warm Tips : 2 x Aukora Cold White Motion Sensor Light Bulbs, 1 x manual. Warm tips: The product does not include enclosed fixture cover, the infrared sensor cannot be used in a closed lampshade. Welcome to use Aukora's products. Enjoy Your Colorful Life, Just Start From Aukora Light bulbs instructions: 1. The sensing range for the bulb is 8-10 FT. The light bulb must be installed within the induction range. 2. The motion sensor bulb only activates in the dark, the light bulb cannot be lit during the day. 3. The sensor bulb should not be installed inside a lampshade. 4. If you experience issues with the bulb not working, please contact us via Amazon, and We will guide you to install as soon as possible
Technical Details Brand Aukora Light Type LED Special Feature Auto on/off, Motion Sensor, Not Dimmable, dusk to dawn sensor Wattage 12 watts Bulb Shape Size A19 Bulb Base E26 Incandescent Equivalent Wattage 100 Watts Specific Uses For Product Indoor use only Outdoor use only Light Color White Voltage 120 Volts Unit Count 2.0 Count Color Temperature 6500 Kelvin Number of Items 2 Brightness 1000 Lumen Shape A19 Material Acrylonitrile Butadiene Styrene (ABS) Model Name AU-MS-WH-2P Indoor/Outdoor Usage Indoor Power Source AC/DC Color Rendering Index 80 Beam Angle 270 Degrees Power Consumption 12 Watts Item Package Quantity 1 Light Source Type LED Light Source Wattage 12 Watts Product Dimensions 2.36"W x 4.52"H Accepted voltage frequency 100 to 120 Volts and 60 Hertz Control Method App Average Life 15000 Hours White Brightness 1000 Lumens Efficiency High Style Modern Manufacturer Aukora Color Motion Sensor-cool White Light Output Maximum 1000 Lumens Part Number AU-SB-12W-2P Item Weight 3.2 ounces Item model number QP6012SA Is Discontinued By Manufacturer No Size 2 Count (Pack of 1) Finish Clear Number Of Pieces 2 Cutting Diameter 2.36 Inches Special Features Auto on/off, Motion Sensor, Not Dimmable, dusk to dawn sensor Included Components 2 x Aukora Cold White Motion Sensor Light Bulbs, 1 x manual Batteries Included? No Batteries Required? No Warranty Description 2 years manyfacturer. Assembled Diameter 2.36 Inches
Frequently Asked Questions
Can I use this motion bulb in an outdoor porch fixture that is exposed to weather?
Yes, as long as the fixture itself is rated for outdoor or damp locations, the bulb will work in porch lights, garage sconces, and covered patio fixtures. The bulb adds motion and dusk to dawn activation to the existing weatherproof housing.
Will the dusk to dawn sensor work outside where ambient light changes throughout the night?
Yes. The sensor is calibrated to activate below approximately 15 Lux and deactivate above approximately 40 Lux, so it is designed to operate under porch, patio, and driveway conditions where lighting levels change with moonlight and streetlights.
Is the motion detection range long enough for a driveway or backyard path?
The PIR sensor detects motion from 8 to 10 feet away, which is well suited to porches, garage entries, gates, and short paths. For very long driveways, you may want multiple bulbs across the route for full coverage.
Can I take this bulb camping or use it in an RV?
Yes. As long as your RV, camper, or campsite lantern uses a standard E26 socket, you can screw the bulb in for portable, hands-free, motion-activated lighting that does not require rewiring or any smart home setup.
Will the 1000 lumen output be bright enough for outdoor entertaining?
Yes. At 1000 lumens, the 12W bulb produces light comparable to a 100W incandescent, which is plenty for patio dinners, backyard gatherings, and outdoor seating areas when triggered by motion in the dark.
Is this bulb a good choice for outdoor dining areas where I want light only when guests are present?
Yes. The dual sensor design means the light stays off during the day and only activates when guests move around the table after dark, then shuts off automatically when the area is empty, which is ideal for energy conscious entertaining.
Can I use this bulb in a covered patio fixture versus a fully open one?
Both work well. Covered patio fixtures and fully open fixtures both accept the standard E26 base. Just make sure the sensor tip is oriented so it can see the area where motion should be detected, ideally facing downward or outward.
Is this a good replacement for solar path lights in my garden?
It can be a useful supplement or alternative where you have a socket-based fixture, such as a post light, lantern, or string light adapter. The motion activation is more reliable than solar in shaded or cloudy conditions.
Will rain or humidity affect the motion sensor?
The bulb itself is sealed LED electronics, and the PIR sensor is not affected by humidity. As long as the bulb is installed in a properly rated outdoor fixture, weather will not impact its ability to detect motion and activate.
Does the cool white 6500K option work well for outdoor security purposes?
Yes. Cool white 6500K is the most popular choice for outdoor security lighting because it provides bright, daylight-like visibility that makes it easier to see faces, packages, and details at a front door or driveway.
Can I use this bulb in a balcony outlet fixture in my apartment?
Yes. Since the bulb screws into a standard E26 socket, renters can add automatic motion lighting to a balcony without any tools, wiring, or landlord approval, as long as the existing fixture is rated for outdoor use.
How does this compare to installing a separate outdoor motion sensor floodlight?
A motion sensor floodlight requires electrical wiring and often professional installation, while this bulb simply screws into an existing fixture. For covered porches, garage sconces, and patio lights, it delivers similar automatic behavior in minutes.
Can I use this bulb in a string light setup for outdoor dining?
Yes, as long as the string lights use standard E26 sockets, you can replace individual bulbs with motion sensor versions to create zones that light up when guests arrive or when someone steps outside at night.
Will the bulb activate from passing cars or pedestrians on the street?
The PIR sensor detects motion within an 8 to 10 foot cone, so it is most sensitive to activity near the fixture. Aiming the bulb toward the entryway, porch, or seating area rather than the street will help avoid unwanted triggers from passing traffic.
Is the bulb bright enough to light a small backyard gathering?
For a small backyard seating area under a fixture, 1000 lumens is generally enough to provide a comfortable level of light for dining and conversation. For larger yards, plan to use multiple bulbs in multiple fixtures.
Will the dusk to dawn sensor work under a covered porch that never gets direct daylight?
Yes. The sensor reads ambient light levels rather than direct sunlight, so even under a covered porch or eave, it will reliably detect dusk and dawn conditions and only activate when it is dark enough to need light.
How do I install this motion sensor light bulb?
Installation takes less than a minute. Switch off the fixture, screw the bulb into any standard E26 socket, and switch the fixture back on. The bulb will automatically calibrate to ambient light and begin detecting motion within seconds. No wiring, tools, or smart home hub is required.
How do I make sure the motion sensor detects properly in my fixture?
Mount the bulb so the sensor tip is oriented downward or outward toward the area where motion should be detected. Avoid enclosed fixtures where the sensor is blocked or facing the ceiling. After installation, walk through the area to confirm the detection range works for your space.
Can I leave the bulb switched on all the time or do I need to flip a switch?
Yes, you can leave the wall switch in the on position at all times. The bulb uses its built-in sensors to decide when to light up and when to stay off, so you do not need to turn the switch on and off throughout the day.
Will this bulb fit my existing lamp or ceiling fixture?
The bulb uses a standard E26 screw base, which is the most common household socket in North America. It fits most table lamps, floor lamps, ceiling fixtures, sconces, and outdoor lanterns. The only requirement is that the fixture allows the sensor tip to have a clear line of sight to the area you want monitored.
Is this bulb compatible with dimmer switches?
The bulb is not designed to be used with traditional dimmer switches, because it has its own internal sensor logic that controls when the light turns on. For best results, install it on a standard on/off switch or leave the wall switch in the on position and let the bulb manage itself.
What is included in the box when I order this bulb?
Each order includes the selected quantity of motion sensor light bulbs in your chosen color temperature, packaged securely for shipping. The bulbs are ready to use immediately and require no additional accessories, hubs, batteries, or apps to operate.
Is it normal for the bulb to flicker or stay dim during the first use?
No. After screwing the bulb in and turning on the switch, allow a few seconds for the internal sensors to calibrate to the ambient light level in the room. Once calibrated, the bulb will respond cleanly to motion and ambient light without flickering.
What should I do if the bulb stays on longer than expected?
The bulb is designed to stay on as long as motion or presence is detected. If you are in the area, the stay on feature will keep the light on. Once the area is empty for 45 to 60 seconds, the bulb will shut off automatically.
What is the difference between a motion sensor bulb and a smart bulb?
A smart bulb requires a phone app, smart home hub, or voice assistant to control, and typically relies on Wi-Fi or Bluetooth. A motion sensor bulb has the sensors built directly into the bulb itself, works automatically with no app, no hub, and no account, and reacts to motion and ambient light on its own.
