ALITOVE Blue LED Accent Strip for Living Room Cove and Shelving, 16.4ft Dimmable 12V 5050 SMD
ALITOVE Blue LED Accent Strip for Living Room Cove and Shelving, 16.4ft Dimmable 12V 5050 SMD
Couldn't load pickup availability
Why you'll love it
- Upgraded VHB heavy-duty foam tape holds firmly to surfaces where cheaper blue/white tapes commonly peel off
- IP65 silicone coating lets the same strip work outdoors on decks, in gardens, or on boats without buying a separate product
- Safe 12V DC low voltage is touchable around children and pets, with no risk of high-voltage shock
- Cuttable every 3 LEDs along marked lines enables custom-length fits for non-standard spaces
- Dual power input ends (bare 2-pin wire and 5.5x2.1mm DC barrel) prevent needing extra adapters
- 24-month warranty signals the brand stands behind durability claims
Perfect for
- Blue accent lighting under kitchen cabinets or along stair treads for nighttime visibility
- Waterproof deck and boat lighting for evening entertaining
- DIY backlight behind a TV, mirror, or headboard for ambient glow
- Custom-cut accent strips to fit shelving, coves, or display cases
- Holiday or party decoration for indoor and outdoor venues
Parameter:
- Light source: SMD 5050 Blue LED
- LED quantity: 60 LEDs/m, 5m 300 LEDs in total
- Protection Rate: IP65 Waterproof (Can’t be used underwater)
- Max Power: 12V DC, 5A, 60W
- Working temperature: -20℃ to 40℃
- Size: L500cm (5M) x W1.0cm x T0.25cm
- Package List: 1x 16.4ft ALITOVE Blue LED strip (No power supply and dimmer, only LED strip)
Kindly Note:
- Only the LED strip in the package, power supply is not included. To let it work, you need to buy a ALITOVE 12V 5A 60W power supply.
- If the strip blinks or flashes, it means the power is not enough for the strip. The power for 5m led strip must be 12V 5A 60W at least.
- The LED strip is flexible, but please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack.
Product Information
【VHB Foam Back Tape】 Based on buyers’ feedback on adhesive issue, we upgraded the tape to VHB heavy duty foam mounting tape. It is much more sticky and durable than blue or white tapes which is widely used by other brands. Never fall off. ( Heating the tape with heat gun or hair dryer will make it more sticky.) 【Super Quality LED Strip】 300 pcs high-brightness 5050 blue LEDs are evenly embedded on the 5m(16.4ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural. Low voltage 12V DC input, safe to use, touchable to children. 【Flexible Design & Cut Easily】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY. 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included. 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months warranty. We always stand behind our products. 𝐈𝐦𝐩𝐨𝐫𝐭𝐚𝐧𝐭: Please note that if used with vehicles such as cars, RVs, trucks, etc., please ensure that the power supply provides a stable voltage; if used for a long time at more than 12V, the circuit board will be damaged, resulting in abnormal conditions. 𝐖𝐡𝐚𝐭 𝐤𝐢𝐧𝐝 𝐨𝐟 𝐩𝐨𝐰𝐞𝐫 𝐬𝐮𝐩𝐩𝐥𝐲 𝐬𝐡𝐨𝐮𝐥𝐝 𝐲𝐨𝐮 𝐜𝐡𝐨𝐨𝐬𝐞: It is recommended to use our 12V 5A 60W power supply(ASIN: B01GEA8PQA). Many power supply labels on the market are false and the power is not as high as claimed. If the power supply is overloaded, the DC connector will become hot.
Features & Specs Indoor Outdoor Usage Outdoor Additional Features Dimmable Light Source Type LED Power Source DC 12V Light Color Blue Controller Type Remote Control Connectivity Protocol NO Connectivity Technology Corded Connection Voltage 12 Volts Wattage 60.00 Control Method App Water Resistance Level Waterproof Wireless Communication Technology NO Number of Batteries 5 A batteries required. Style Color Blue Theme Decoration , Lighting , Party , Holiday Occasion Party , Holiday , Show Product Style Modern Measurements Number of Light Sources 300 Item Weight 16 ounces Number of Items 1 Item Dimensions 196 x 1 x 8 inches
Frequently Asked Questions
Will the blue light strip look too 'techy' or cheap in a styled bedroom or living room?
The 5050 LEDs deliver a smooth, even blue glow with no visible hotspots, and the strip tucks behind headboards, under coves, or along shelf edges so the source stays hidden. What you see is ambient light, not a visible fixture, which keeps the room feeling curated rather than gadgety.
Can I cut the strip to fit a custom headboard or non-standard shelf length?
Yes. The strip has clearly marked cut lines every 3 LEDs along the FPCB, so you can trim it to the exact measurement of your headboard, mirror, or shelving with ordinary scissors. Solder or clip a fresh connector to the new end to restore power input.
Does the blue color clash with warm wood tones or neutral decor palettes?
Cool blue reads as a deliberate accent rather than a clash when used in small doses — think under-cabinet glow, stair tread edges, or behind a TV. Pair it with warm-white room lighting and natural textures, and the blue functions as a focal accent similar to a piece of artwork.
Is the strip dimmable so I can tune the ambiance for movie night or relaxing?
Yes. The 12V DC low-voltage input is fully dimmable with any compatible 12V LED PWM controller or dimmable driver. A simple knob or remote dimmer lets you shift from a soft glow to full accent brightness in seconds.
Will the VHB tape damage my painted wall or wood finish when removed?
VHB tape is strong but removable. Warming the tape gently with a heat gun or hair dryer softens the adhesive for clean peel-off. On freshly painted drywall, prime and fully cure the paint (typically 2–4 weeks) before mounting to avoid pulling paint off later.
Can I use this strip as a TV backlight to reduce eye strain in my living room?
Yes. Mounting the strip around the back perimeter of your TV creates a soft blue bias light that reduces the contrast between the screen and the dark wall, easing eye fatigue during evening viewing. It pairs especially well with the 12V DC input that can share a TV-back USB-to-DC adapter in some setups.
Will the blue glow show hot spots or dots through a frosted diffuser?
At 60 LEDs per meter, the LED spacing is tight enough that even a shallow frosted diffuser or translucent silicone cover produces a smooth, even line of blue light. For best results, recess the strip at least half an inch inside the diffuser channel.
Does this work as a headboard backlight in a small bedroom without feeling overwhelming?
In a smaller room, run only a 6–8ft section behind the headboard and dim it to 30–40%. The result is a calm, low-level blue halo that defines the bed zone without flooding the room with color.
How does this compare to neon rope for home decor accent lighting?
Traditional glass neon is heavy, fragile, requires professional installation, and runs hot. This 12V LED strip is flexible, cuttable, cool to the touch, and installs in minutes with VHB tape, giving a similar continuous blue glow with far more placement flexibility at a lower cost.
Is this better than a plug-in blue rope light for under-cabinet kitchen use?
Compared to a 120V plug-in rope light, this 12V LED strip is safer around water-prone counters, slimmer to conceal under the cabinet lip, and cuttable to exact cabinet runs. The 12V DC also means no high-voltage shock risk near sinks.
Can I sync multiple strips across a room for a continuous look without visible breaks?
Yes. Run two or more strips in parallel from the same 12V driver, aligning the start of each run so the blue glow appears continuous. Soldering short jumper wires between strips hides seams behind furniture or inside coves.
Will the silicone coating yellow over time and ruin the room aesthetic?
The clear silicone IP65 coating is formulated for low UV yellowing under typical indoor lighting. In rooms with direct intense sunlight, occasional wipe-downs keep the surface reading crystal clear, preserving the pure blue output.
How long will the LEDs last before the color or brightness shifts?
Quality 5050 SMD LEDs are typically rated for 30,000+ hours of use, which equals several years of typical evening accent lighting before any noticeable shift. Running the strip at reduced brightness with a dimmer extends that lifespan further.
Can I hide the strip completely so only the glow is visible, not the strip itself?
Yes. The most common approach is to recess the strip inside a shallow aluminum channel with a frosted cover, or mount it just behind a lip so only the light wash is visible on the wall. The slim 10mm width fits inside most standard crown molding and cabinet valances.
Will the blue light disturb my sleep if I leave it on overnight?
Blue light is stimulating and can interfere with melatonin, so for sleeping it's best to switch the strip off or dim it to its lowest setting. A simple timer or smart plug lets you schedule the strip to turn off at bedtime while still serving as a gentle navigation light earlier in the evening.
What is the #1 hesitation people have before adding colored LED strips to a 'nice' room?
Most buyers worry that colored lighting will look gimmicky or date the room. The best protection against that is using blue sparingly as an accent — behind a TV, under a shelf, or along a single architectural line — and pairing it with a dimmer so the intensity always feels intentional.
How do I install the blue LED strip on a clean surface?
Wipe the surface with isopropyl alcohol, let it dry fully, peel the VHB tape backing, and press the strip firmly along the mounting line for 30 seconds. For best adhesion, warm the tape gently with a heat gun or hair dryer before pressing. Then connect the bare 2-pin wire or 5.5x2.1mm DC barrel end to a compatible 12V DC power supply, and the strip lights up.
Can I cut the strip to a custom length, and how do I rewire the cut end?
Yes. Cut only along the printed scissor marks, which are spaced every 3 LEDs. To restore power on a cut end, either solder a fresh 2-pin connector or use a solderless clip-on connector matched to the 10mm FPCB width. Seal the new end with a small dot of silicone if the installation is outdoors or in a damp area.
How do I dim or control the brightness of the strip?
Connect a compatible 12V DC PWM dimmer or RF/WiFi LED controller between the power supply and the strip. Most standard single-color 12V dimmers work with this strip and let you set the exact blue intensity you want. Pair the dimmer with a smart plug or voice assistant for app or voice control.
Does this strip work with a standard 12V LED dimmer or smart controller?
Yes. Any controller rated for 12V DC single-color LED strips up to 60W is compatible. Confirm the controller's amperage exceeds the strip's 60W / 12V = 5A draw, and match the connector — the strip's 5.5x2.1mm DC barrel input pairs with most off-the-shelf 12V controllers, while the bare 2-pin input suits screw-terminal or soldered connections.
Is this strip compatible with a 5V USB power bank or only 12V?
This strip is rated for 12V DC only. Connecting it to 5V will result in dim, incomplete lighting and may cause uneven color across the length. For portable use, choose a 12V battery box or a step-up converter rated for the strip's 5A draw.
What is included in the box, and what do I need to buy separately?
The box includes one 16.4ft (5m) blue 5050 LED strip with VHB tape pre-applied and an IP65 silicone sleeve. A 12V DC power supply is NOT included and must be purchased separately — choose one rated for at least 60W (5A) at 12V. You may also want a 12V PWM dimmer, an on/off switch, and solderless clip connectors if you plan to cut the strip.
Is this strip safe to use outdoors year-round, even in snow or extreme heat?
The IP65 silicone coating protects against rain, splashes, and dust, and the strip operates across typical outdoor temperature ranges. For climates with heavy ice, prolonged sub-freezing temps, or intense direct desert sun, mount the strip in a slightly sheltered location and inspect the VHB bond seasonally for best long-term results.
How long will this LED strip last, and is there a warranty?
The 5050 SMD LEDs are rated for approximately 30,000 hours of use, which translates to many years of typical accent-light use. The strip is backed by a 24-month warranty against manufacturing defects, giving you clear recourse if anything fails well before that lifespan.
What is the difference between an LED strip light and rope light?
Rope light is a series of small LEDs encased in a thick, rounded PVC tube — bulkier, harder to conceal, and typically dimmer per foot. LED strip light uses surface-mount LEDs on a flat, flexible circuit board, allowing a slimmer profile, brighter output, cuttable sections, and easier mounting with VHB tape. For most modern accent and task lighting, LED strip is the more versatile choice.
